Express 831
Shower screen with telescopes
The shower screen protects the space and the fixtures located next to the shower from splashing water. The telescope mount shower screen is easy to install and it can used for effective protection from water.
The shower screen is attached by its sides to the building wall with the wall mountedprofile and between the floor and the ceiling by means of telescope mounting (room height max 280 mm). Then the installation height of the panel can be adjusted depending on the need for use of the space The lower telescope is equipped with a joint adjusting leg for floor tilting. A seal (standard part) may be installed between the panel and the Floor, in order to prevent water from flowing under the panel. Installation guide
10 Working days
20 year warranty
The profiles mounted to the edges of the panel are manufactured of aluminium. The surface is anodized in grey tones. Profiles are sandblasted before anodization, so that the surface is as smooth as possible and there will be no fingerprints. The fittings used in the product, like square foot and brace bars, are chrome plated brass alloy.
The product is manufactured of 4mm thick tempered safety panel (EN 12150). The safety panel can be treated in the factory with Cranith calcification prevention coating. The coating enables the panel to stay clean easier. Clear and smoke are smooth surfaced and transparent panels
The size of the shower screen can be selected from the standard dimensions. wall mounted profiles have 20mm of adjustment range. The adjustment range can be used for levelling any tilt of the building s wall or for extension of the width of the shower screen in relation to the provided standard dimensions. The width can be further extended by 34 mm via the extension profile (optional accessory). The extension profile can be grooved, for example, for the inlet of the surface water pipes.
Product size
The total width of the selected product is:
- At its narrowest: 370mm
- At its widest: 390mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building s walls.:
The product is supplied as standard with a 33 mm high floor seal. The optional accessories are a 50 mm high floor seal for shower areas where the floor tilting is higher than normal. The length of the floor seal is 1000 mm and it is cut to a suitable length on site. The watertight quality of the product can be improved by installing a step profile under the door. The step profile is cut into a suitable length on the side and glued to the floor. The height of a shaped step profile is 10 mm and its width is 16 mm.
Product
Product code
Price
1
Express 831
Product code
831-81-4
Price
0.00 €
2
Express 831 Shower screen
Grey anodized/Transparent/A=370 x 1850
Product code
831 81 0037
Price
0.00 €
3
TOTAL
Product code
Price
0.00 €
The total width of the selected product is:
- At its narrowest: 370mm
- At its widest: 390mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building s walls.:
| EAN: |
|---|