8_25 5ARLM Blak sliding 860_861_862.pdf
Vetro_531 (511+512)_no handle.jpg
Inne W1N New York
Wall mounted sliding door with soft closing mechanism
The sliding door unit consists of a glass screen and a sliding mechanism mounted to the building wall above the doorway.Sliding door fixture takes up very little space in the room, a quality sliding mechanism and a floor guide fitting provides a smooth and safe door movement.The doors are equipped with soft closing mechanism which cushions the closing and gently pulls the door into position.
The sliding rail profile is fixed to the building wall above the doorway. The sliding mechanism is affixed to the top of the door panel before being mounted on the sliding profile. The sliding rail profile is covered with a cover plate.
20 Working days
20 year warranty
The white (RAL 9016), black (RAL 9005), Sand (RAL 1019) and Mocha (RAL 8025) surface treatment options are manufactured by powder coating. The fittings used in the product, are made of painted brass alloy.
The product is manufactured of 6mm thick tempered safety panel (EN 12150). Transparent, grey and brown are smooth surfaced and transparent panels. Reeded and satin panels are not fully transparent, details cannot be made out through the panel. The reeded glass is smooth on one side and textured on the other. One side of the satin panel is etched to acquire a velvety feel and the other side is smooth. When choosing a satin panel product, bear in mind that the etched surface of the panel is sensitive to scratches and stains.
The sliding door is always manufactured according to custom dimensions. When ordering, enter actual width of door gap and height of door gap. The door will be manufactured 40 mm wider than entered doorgap. It is recommended that the width of the door should always be at least Height/3.
Inne W1N New York
Inne sliding Door
White painted/Transparent=800 x 1900
766 61 0000