Forma 384
Hinged shower door with a fixed part and magnet locking
The shower screen consisting of a fixed part and of a hinged door part. This screen protects the space and the fixtures located next to the shower from splashing water. The fixed part efficiently restricts water and when the shower is not in use, the hinged part can be turned to the side. Due to the combination of the fixed and the hinged part the shower door can be dimensioned even in cramped spaces so that the folding part does not hit other fixtures. The door is equipped adjustable centring. The centring attempts to return the door back to the open and closed positions. The door has a magnet seal that locks tightly to its counterpart when the shower is in use.
The shower door and the wall magnet are mounted to the building wall by means of wall mountedprofiles. The fixed wall is supported from the top edge with the brace installed in the corner and from the bottom corner by the fitting glued to the floor. Between the panel of the fixed part and the floor will be a 25mm high gap. seal (standard part)s may be installed between the panel and the may be installed a seal (standard part) , so that water will not be able to under the panel. In the bottom edge of the hinged part can be installed can be installed along the bottom edge of the door panel.Installation guide
10 Working days
20 year warranty
The profiles mounted to the edges of the panel are manufactured of aluminium. The white (RAL 9016) and black (RAL 9005) surface treatment options are manufactured by powder coating. Grey and bright are anodized coatings. Profiles are sandblasted before anodization, so that the surface is as smooth as possible and there will be no fingerprints. The fittings used in the product, like square foot and brace bars, are made of brass alloy and correspond with the chosen profile color. White and black profiles have white or black painted fittings, bright profiles have chrome plated fittings and grey profiles have fittings with a brushed nickel finish.
The product is manufactured of 6mm thick tempered safety panel (EN 12150). The safety panel can be treated in the factory with Cranith calcification prevention coating. The coating enables the panel to stay clean easier. Clear, grey and bronze are smooth surfaced and transparent glasses. Chinchilla, satin and reeded glasses are not fully transparent, details cannot be made out through the panel. Chinchilla and reeded are textured on one side and smooth on the other side. One side of the satin panel is etched to acquire a velvety feel and the other side is smooth. When choosing a satin panel product, bear in mind that the etched surface of the panel is sensitive to scratches and stains.
The size of the shower corner can be selected from among the standard sizes or it can be manufactured custom dimensions. The adjustment range of the wall mountedprofile of the fixed part is 20mm and that of the door, 15mm, respectively. The adjustment range can be used for levelling of any tilt of the building s walls or for extending the widths of the sides of the shower enclosure in relation to the provided standard dimensions. The widths of one or both sides can be further extended by 34 mm via the extension profile (optional accessory). The extension profile can be grooved, for example, for the inlet of the surface water pipes.
Product size
The selected combination can be installed into the opening (L1) the width of which is:
- At is narrowest: 797mm
- At its widest: 832mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building s walls. Note! The parts of the combination can also be installed in the direction opposite to the direction shown in the layout.:
The product is supplied as standard with a 33 mm high floor seal. The optional accessories are a 50 mm high floor seal for shower areas where the floor tilting is higher than normal. The length of the floor seal is 1000 mm and it is cut to a suitable length on site. The watertight quality of the product can be improved by installing a step profile under the door. The step profile is cut into a suitable length on the side and glued to the floor. The height of a shaped step profile is 10 mm and its width is 16 mm.
Please select handle model:
Product
Product code
Price
1
Forma 384
Product code
384-61-11
Price
0.00 €
2
Forma 304/305 Shower door fixed part
White painted/Transparent/A=380 x 2025
Product code
304 61 0038
Price
378.00 €
3
Forma 304 Shower door hinged part
White painted/Transparent/B=417 x 2025
Product code
304 61 1036
Price
357.00 €
4
Wall magnet
Product code
329 6L 1001
Price
105.00 €
5
Hexagonal handle chrome
Product code
F01 RL MMMM
Price
63.00 €
6
TOTAL
Product code
Price
903.00 €
The selected combination can be installed into the opening (L1) the width of which is:
- At is narrowest: 797mm
- At its widest: 832mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building s walls. Note! The parts of the combination can also be installed in the direction opposite to the direction shown in the layout.:
| EAN: |
|---|