Installation_guide.pdf

385.pdf

385.pdf

glass clamp.jpg

Folding hinge.jpg

Lifting hinge.jpg

Square_handle.jpg

Hexagonal_handle.png

Polished_cutout_handle.jpg

Assembly_instructions.pdf

Forma 385

Folding shower door with a fixed part and magnet lock

The shower screen consisting of a fixed part and of a hinged part hinged to it protects the space and the fixtures located next to the shower from splashing water. The fixed part efficiently restricts water and when the shower is not in use, the folding part can be folded into the little space inside the shower area in the direction of the building wall. Due to the combination of the fixed and the folding part the shower screen can be dimensioned even in cramped spaces so that the folding part does not hit other fixtures. The folding part of the shower door rotates 90 degrees in both directions and is equipped with adjustable centring. The centring attempts to return the folding part back to the open and closed positions. The outermost panel of the folding part rotates 180 degrees , in addition to the outer panel in relation to the inner panel of the folding part, so that the panels fold against each other into the inside portion of the shower area. The door has a magnet seal that locks tightly to its counterpart when the shower is in use.

The shower door and the wall magnet are mounted to the building wall by means of wall mountedprofiles. The fixed wall is supported from the top edge with the brace installed in the corner and from the bottom corner by the fitting glued to the floor. Between the panel of the fixed part and the floor will be a 25mm high gap. seal (standard part)s may be installed between the panel and the may be installed a seal (standard part) , so that water will not be able to under the panel. In the bottom edge of the panels of the folding part can be installed can be installed along the bottom edge of the door panel.Installation guide

Icon

19 Working days

Icon

20 year warranty

The profiles mounted to the edges of the panel are manufactured of aluminium. The white (RAL 9016) and black (RAL 9005) surface treatment options are manufactured by powder coating. Grey and bright are anodized coatings. Profiles are sandblasted before anodization, so that the surface is as smooth as possible and there will be no fingerprints. The fittings used in the product, like square foot and brace bars, are made of brass alloy and correspond with the chosen profile color. White and black profiles have white or black painted fittings, bright profiles have chrome plated fittings and grey profiles have fittings with a brushed nickel finish.

The product is manufactured of 6mm thick tempered safety panel (EN 12150). The safety panel can be treated in the factory with Cranith calcification prevention coating. The coating enables the panel to stay clean easier. Clear, grey and bronze are smooth surfaced and transparent glasses. Chinchilla, satin and reeded glasses are not fully transparent, details cannot be made out through the panel. Chinchilla and reeded are textured on one side and smooth on the other side. One side of the satin panel is etched to acquire a velvety feel and the other side is smooth. When choosing a satin panel product, bear in mind that the etched surface of the panel is sensitive to scratches and stains.

The size of the shower door can be selected from the standard dimensions or it can be manufactured custom dimensions. The wall mountedprofiles have the total of 35mm adjustment tolerance The adjustment range can be used for levelling any tilt of the building s walls as well as for accommodating the shower door into the installation opening. For the purposes of accommodating the fitting into the opening, one or more extension profiles extension profiles (optional accessory). One extension profile extends the width of the alcove fitting by 34mm and it can be grooved for example for the inlet of the surface water pipes.

Product size

Shower door fixed part (A)

X

Shower door folding part (B)

X

The selected combination can be installed into the opening (L1) the width of which is:
- At is narrowest: 997mm
- At its widest: 1032mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building s walls. Note! The parts of the combination can also be installed in the direction opposite to the direction shown in the layout.:

Image

The product is supplied as standard with a 33 mm high floor seal. The optional accessories are a 50 mm high floor seal for shower areas where the floor tilting is higher than normal. The length of the floor seal is 1000 mm and it is cut to a suitable length on site. The watertight quality of the product can be improved by installing a step profile under the door. The step profile is cut into a suitable length on the side and glued to the floor. The height of a shaped step profile is 10 mm and its width is 16 mm.

Please select handle model:

Product

Product code

Price

1

Forma 385

Product code

385-61-11

Price

0.00 €

2

Forma 304/305 Shower door fixed part
White painted/Transparent/A=380 x 2025

Product code

304 61 0038

Price

378.00 €

3

Forma 305 Shower door folding part
White painted/Transparent/B=617 x 2025

Product code

305 61 0056

Price

514.00 €

4

Wall magnet

Product code

329 6L 1001

Price

105.00 €

5

Hexagonal handle chrome

Product code

F01 RL MMMM

Price

63.00 €

6

TOTAL

Product code

Price

1060.00 €

The selected combination can be installed into the opening (L1) the width of which is:
- At is narrowest: 997mm
- At its widest: 1032mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building s walls. Note! The parts of the combination can also be installed in the direction opposite to the direction shown in the layout.:

EAN: